Paper Template
Copyright Form
Author Guidelines
1. Quality
Papers must be double-blind refereed according to the support society’s strict standards. Papers should preferably be sent to 3 referees (2 minimum) and must be amended according to their comments. If one referee accepts the paper and one rejects it, the decision of the third
referee is final. Guest Editors should retain the referees’ reports until the paper has been
published. The publisher reserves the right to re-referee and/or reject an accepted paper if the
paper does not meet the criteria outlined in the review form or if the paper is in some other
way deemed unsuitable.
Also, there should be a balance of papers internationally and topically, and account must be
taken from the status and credibility of the research centers from where the submitted papers
are accepted and published.
2. Submission Guidelines
All accepted papers will be published in the web first, and included in the hard copy journal later.Authors should submit paper with about 10 to 18 pages by using online systems of respective journal.
Paper Format:
Link Will be uploaded soon
One-Two (1-2) months for invited authors to submit the first draft of their papers;
Minimum of one (1) month for the refereeing process and to inform the authors of the
outcome of the refereeing process and of any changes requested by the referees.
One (1) month for authors to resubmit the final manuscript of their papers after incorporating any changes requested by the referees.
3. Review Process
A. Initial Screening
All submitted and invited papers should go through an initial screening process to screen papers which are not suitable or has have different focus, papers which are marginal, weak papers, etc. Only relevant and of high quality papers should be processed and sent to referees (we do not want to waste the time of the referees by sending poor or marginal papers to them). Send every paper which passes the initial screening process to be refereed by three experts.
B. Refereeing Process:
If two referees accept the paper, the paper is then considered for selection. However, if they accept the paper BUT the paper only scored marginal or just acceptable for Originality, Quality, Relevance, Presentation and Recommendation then the paper is not up to the standard of the journal and the editor should reject it.
If two referees reject the paper, the paper is rejected and the authors are informed.
If two referees disagree, then the third referee’s decision is final.
Editor-in-Chief may reject papers which have been rejected by referees but cannot send acceptance letters to authors until the selected papers for the special issue and their refereeing reports have all been reviewed by the Editor-in-Chief.
4. Publication Process
The Publisher reserves the right to make a final review, i.e. final acceptance of the papers is
subject to this final review process which is a part of the publisher's quality assurance process before publication.
The final manuscript of each selected paper should include:
Title of the paper, names of authors, their affiliations, complete addresses and e mail
addresses.
The name, address, email address and fax number of the corresponding author to whom the
proof of the typeset paper should go to for checking.
A brief abstract.
Keywords.
Brief biographical notes about authors.
High quality and high resolution figures suitable for printing high quality figures in black
and white.
Each paper must have the SERSCAuthor Agreement (Copyright form) completed by the
author. If a paper has more than one author, each author must sign a Copyright form of their
own. It is not acceptable for one author to sign on behalf of all authors. As stated above,
papers will not be processed unless a signed Copyright form from each author is attached to it.
If papers have been refereed and accepted and sent for typesetting, the authors have to abide by what they have written; no further changes are acceptable in:
Author‘s details (e.g. adding more names or deleting names) or in their sequence
The content of the paper (except for typesetting corrections)
If authors wish to make changes to content, then the paper has to be withdrawn and must go back to be refereed as a new paper. If there is any dispute about authorship or intellectual property, the paper must be withdrawn completely from publication until the authors settle their legal claims. It is not the publisher’s responsibility to solve or interfere in any intellectual property dispute.
5. Typesetting
When the papers for the special issue are accepted by the final review process, the papers are processed for typesetting and all the succeeding publication processes will be conducted by the publisher.
The corresponding author of each paper will receive by email the proof of his/her paper to
check. He/she must return the corrected proofs within seven days in order to avoid any delays
in publishing the special issue. If the research society has not received a response by then,
the research society will contact Guest Editors to help chase the author for a reply.
After having their corrections incorporated by the typesetter, the proofs will again be sent to
authors to check and to ensure that all their corrections are included. It is the responsibility of
authors to check and correct the proofs of their papers. Papers cannot be published until they
are checked and approved by authors. And papers cannot be amended once they are published, except in very exceptional circumstances, so authors should take great care in approving the final version for publication.
6. Author Entitlement and Postprint Permission
The author/s will received a PDF file of their published paper. Hardcopies of journal issues may
be purchased at a special price for authors. The Journal will also permit the Author to use the Articlefor non-commercial purposes after publication:
a. Using the Article for further research and in courses that the Author is teaching provided
acknowledgement is given to the Journal as the original source of publication.
b. Posting the Accepted Version (final post-acceptance manuscript version) on the author’s
personal web pages or in an institutional repository maintained by the institution to which the
Author is affiliated, provided acknowledgement is given to the Journal as the original source
of publication and upon condition that it shall not be accessible until after 5 months from
HM Publishers's publication date).
c. Incorporating the Article content in other works by the Author, provided acknowledgement is
given to the Journal as the original source of publication. In all cases, full acknowledgement in the form of a full citation must be given to the Journal as the original source of publication, together with a link to the Journal web page and/or DOI.
7. Copyright and Author Rights
HM Publishers is an international center for supporting distinguished scholars and students who are researching various areas of Science and Technology. HM Publishers wishes to provide good chances for academic and industry professionals to discuss recent progress in various areas of Science and Technology. It organizes many international conferences, symposia and workshops every year, and provides sponsor or technical support to researchers who wish to organize their own conferences and workshops. In all that we do, we work to ensure the widest possible access to the articles that we publish, to enhance the reputation of the author, the journal, its editor and editorial board, and the value that we add as publisher in both printed and online form. The transfer of copyright is standard practice in journal publishing. It also enable us to defend and enforce authors’ rights against
plagiarism, copyright infringement, unauthorized use and, most important for authors’ professional reputation, breach of authors’ moral rights.
8. Special Sections
This journal will also publish scientific news and views, reports, commentary, technical comments, research highlights, science and technology features and perspectives, business, book reviews, jobs, etc., at the discretion of Editor-in-Chief and Associate Editors. Authors are advised to cite proper and correct sources for news, research highlights, etc.
9. Journal Policy
It is Journal policy to publish only original and unpublished research work therefore Journal does not wish to receive any papers on research work that has already been reported in parts or contains already published text, data, figures, tables or other illustrations or any copyright materials whatsoever that has been submitted or accepted for publication either in a journal or conference proceedings elsewhere in any form, in print or in electronic media. When submitting a manuscript, authors should make a full statement to the Editors that the research work contained in their manuscript is completely original and unpublished. If redundant or duplicate publication is attempted or occurs authors should expect immediate editorial action to be taken including prompt rejection of the submitted manuscript. Submission of any manuscript that contains redundant or duplicate publication of the same or very similar research work violates the policies of this journal.
10. Ethical Compliance
Research papers reporting animal or clinical studies should, where appropriate, contain a statement that they have been carried out with animal or human ethics committee approval. All scientific studies should be carried out in accordance with the relevant national and local guidelines. Each author(s) warrants that his or her research institution has fully approved the protocol for all scientific studies involving animals or humans and that all experiments of any kinds were conducted in compliance with ethical and humane principles of research after ethics committee approval.
Privacy Statement
International Journal of Agriculture and Animal Production(IJAAP) is a member of the HM Publishers Publication House. HM Publishers provide the technical platform and some publishing services and operate under the principle of data minimization where only the minimal amount of personal data that is required to carry out a task is obtained.
More information on the type of data that is required can be found in HM Publishers privacy policy below.
HM Publishers Privacy Policy
We take seriously our duty to process your personal data in a fair and transparent way. We collect and manage user data according to the following Privacy Policy. This document is part of our Terms and Service, and by using the press portal, affiliated journals, book, conference and repository websites (the “Websites”), you agree to the terms of this Privacy Policy and the Terms of Service.
What type of personal data do we handle?
There are four main categories of personal data stored by our journal platform, our press platform, and our book management system; Website User data, Author data, Reviewer data and Editor data.
The minimum personal data that are stored are:
Optionally, the user can provide:
The data subjects have complete control of this data through their profile, and can request for it to be removed by contacting hmpublishers2@gmail.com
How do we use the data?
Personal information is only used to deliver the services provided by the publisher. Personal data is not shared externally except for author names, affiliations, emails, and links to ORCiD and social media accounts (if provided) in published articles and books which are displayed as part of the article/book and shared externally to indexes and databases. If a journal operates under open peer review then the reviewer details are published alongside the reviewer details.
How we collect and use your data:
1.1 What data we collect
1.2 Why we collect the data
1.3 What we do (and don’t do) with the data
1.4 What to do if you want to get a copy of your data, or want your data to be removed
2.1 What data we collect
2.2 Why we collect the data
2.3 What we do (and don’t do) with the data
2.4 Why we store the data
2.5 What to do if you want to get a copy of your data, or want your data to be removed
3.1 What data we collect
3.2 Why we collect the data
3.3 What we do (and don’t do) with the data
3.4 What to do if you want to get a copy of your data, or want your data to be removed
4.1 What data we collect
4.2 Why we collect the data
4.3 What we do (and don’t do) with the data
Notification about change of ownership or of control of data
We may choose to buy or sell assets. In the case that control of data changes to or from HM Publishers and a third party, or in the case of change of ownership of HM Publishers or of part of the business where the control of personal data is transferred, we will do our best to inform all affected users and present the options.
(Updated: 3rd August 2021)
Paper Template
Copyright Form